1967-112A
Surveyor 6 was launched at 0739 on 1967 Nov 7 by Atlas Centaur from Kennedy on azimuth 83.0 deg. The probe made a two burn parking orbit ascent. It made a course correction at 0220 on Nov 8. Surveyor VI landed on the Moon at 0101:05 on Nov 10 at 0.47N 1.48W in Sinus Medii. (0.47N 1.48W comes from LO photo correlation, 0.44N 1.37W from tracking; final project report gave 0.51N 1.39W).
At 1032 on Nov 17 the vernier engines were reignited to make a 3m high hop, the first rocket launch from the surface of the Moon.
| Surveyor 6 | |||
| Date | Time | Event | Orbit |
|---|---|---|---|
| 1967 Nov 7 | 0739:01 | Launch by AC-14 | CKAFS LC36B |
| 0741:34 | Atlas BECO | ||
| 0741:37 | Booster sep | ||
| 0724:19 | Panels sep | ||
| 0724:48 | Fairing sep | ||
| 0743:07 | Atlas SECO | ||
| 0743:09 | Atlas sep | ||
| 0743:18 | Centaur MES-1 | ||
| 0748:42 | T+9:38 Centaur MECO-1, | 87.72 159 x 169 x 30.0 | |
| 0801:34 | Centaur MES-2 | ||
| 0803:30 | Centaur MECO-2 | 170 x 664642 x 29.0 | |
| 0803:47 | SV legs deploy | ||
| 169 x 686276 x 29.01 (GD) | |||
| 167 x 684964 x 29.00 (JPL) | |||
| 169 x 684614 x 29.00 (TMX1844) | |||
| 0804:30 | Centaur sep | ||
| 0808:29 | Centaur retro | 168 x 401708 x 28.98 (TMX1844) | |
| 1967 Nov 8 | 0220:02 | TCM 10s 10.1m/s | 371 x 644020 x 29.09 |
| 1967 Nov 10 | 0057:55 | AMR mark | |
| 0058:01 | Verniers on 2.587 km/s | ||
| 0058:03 | Radar sep | -1375 x -9838 x 10.82 | |
| 0058:03 | Retro | ||
| 0058:42 | Retro burnout V=157m/s? | -1737 x 18? x 10.8 | |
| 0058:52 | Vernier high thrust | ||
| 0058:54 | Retro sep | ||
| 0101:02 | Vernier off at 4m | ||
| 0101:04 | Landing | ||
| 1458? | Centaur flyby 27915 km | ||
| Centaur orbit | 169069 x 399952 | ||
| 1967 Nov 11 | 0322 | RCS jet test | |
| 0346 | RCS jet test | ||
| 1967 Nov 17 | 1032:05 | Vernier hop, 3m alt, 2.5m range | |
| 1032:07 | 2.5s burn complete | ||
| 1032:11 | 6.1s flight | ||
| 1967 Nov 26 | 0935 | Shut down for lunar night | |
| 1967 Dec 12 | 1641 | Reactivated | |
| 1967 Dec 14 | 1914 | End of tx | |
No comments:
Post a Comment